2017
Fall | Spring
FALL 2017
Finding Nano in Bacteria: The Bad, The Good, and The Better, presented by Dr. MinJun Kim as part of the Materials Science and Engineering Colloquium Series
Friday, December 1, 2017
11 a.m. – 12 p.m.
On-Chip Atomic Force Microscope: Why and How presented by Dr. Reza Moheimani
Friday, November 10, 2017
11 a.m. – 12 p.m.
Student Seminar Series: “Theoretical study of charge transport in two-dimensional materials using full-band Monte Carlo simulations” by Gautam Gaddemane (Dr. Max Fischetti’s Group)
Friday, November 3, 2017
11 a.m. – 12 p.m.
Resistive Memories Device Optimization Trends from Ab Initio Simulations, presented by Dr. Blanka Magyari-Kope as part of the Materials Science and Engineering Colloquium Series
Friday, October 20, 2017
11 a.m. – 12 p.m.
Student Seminar Series: “Understanding Sources of Dielectric Loss in Polypropylene Based Nanocomposites up to 220 GHz” by Michael Womble (Dr. Julia Hsu’s Group)
Friday, October 13, 2017
11 a.m. – 12 p.m.
Electrical Energy Storage: Next Generation Battery Technologies presented by Dr. Arumugam Manthiram as part of the Materials Science and Engineering Colloquium Series
Friday, October 6, 2017
11 a.m. – 12 p.m.
Student Seminar Series: “Molecular Beam Epitaxy Growth of Transition Metal Dichalcogenides and the Device Applications” by Ruoyu Yue (Dr. Chris Hinkle’s Group)
Friday, September 29, 2017
11 a.m. – 12 p.m.
High-throughput materials discovery and development: breakthroughs and challenges in the mapping of the materials genome presented by Dr. Marco Nardelli as part of the Materials Science and Engineering Colloquium Series
Friday, September 22, 2017
11 a.m. – 12 p.m.
Student Seminar Series: “Layered Metal Dichalcogenides Deposited by Pulsed Laser Deposition” by Martha Serna (Dr. Manuel Quevedo’s Group)
Friday, September 15, 2017
11 a.m. – 12 p.m.
Digital Atomic-Scale Fabrication and the Path to Manufacturing presented by Dr. John Randall as part of the Materials Science and Engineering Colloquium Series
Friday, September 8, 2017
11 a.m. – 12 p.m.
Localized Surface Plasmon Resonance and their applications presented by Dr. Adnen Mlayah, Department of Materials Science and Engineering
Tuesday, September 5, 2017
11 a.m. – 12 p.m.
The Power of Atomic Layer Deposition Moving Beyond Amorphous Films presented by Dr. Virginia Wheeler as part of the Materials Science and Engineering Colloquium Series
Friday, September 1, 2017
11 a.m. – 12 p.m.
Rational design of oxide catalyst for the removal of NOx pollution by Dr, Weichao Wang, Department of Materials Science and Engineering
Friday, August 25, 2017
11 a.m. – 12 p.m.
SPRING 2017
Student Seminar Series: “First-principles Kinetic Monte Carlo Simulation of the Atomic Growth of Transition Metal Dichalcogenides” by Yifan Nie (Dr. Kyeongjae Cho’s Group)
Friday, May 26, 2017
11 a.m. – 12 p.m.
Student Seminar Series: “In situ Infrared Absorption Study of Plasma-Enhanced ALD of Silicon Nitride using Di-sec-butylaminosilane and Bis(t-butylamino)silane” by Fabian Pena (Dr. Yves Chabal’s Group)
Friday, May 19, 2017
11 a.m. – 12 p.m.
Redox Exfoliation of Layered Transition Metal Dichalcogenides presented by Dr. Ali Jawaid, as part of the Materials Science and Engineering Colloquium Series
Friday, April 28, 2017
11 a.m. – 12 p.m.
New Materials & Printing Processes for Flexible Electronics presented by Dr. C. Daniel Frisbie, Department of Chemical Engineering & Materials Science, University of Minnesota, USA as part of the Department of Materials Science and Engineering Col
Friday, April 14, 2017
11 a.m. – 12 p.m.
Student Seminar Series: “Electrical Properties and Interface Traps of MoS2 Transistors with High-k Dielectrics” by Peng Zhao (Dr. Chadwin Young’s Group)
Friday, March 31, 2017
11 a.m. – 12 p.m.
Student Seminar Series: “Thermal Stability and Phase Transition of 2H-MoTe2” by Hui Zhu (Dr. Robert Wallace’s Group)
Friday, March 24, 2017
11 a.m. – 12 p.m.
Using Nanoscale Pattern Formation Resulting from Phase Transformations to Enhance the Functionality of Materials, presented by Dr. Jerry Floro, Department of Materials Science and Engineering, University of Virginia, Charlottesville, VA as part of the Dep
Friday, March 10, 2017
11 a.m. – 12 p.m.
Enhancing Metal/Insulator/Metal (MIM) Tunnel Diodes and Capacitors with Atomic Layer Deposited (ALD) Nanolaminate Insulators and ALD of MoS2 presented by John Conley, School of Electrical Engineering and Computer Science, Oregon State University, Corvalli
Friday, March 3, 2017
11 a.m. – 12 p.m.
Materials Science and Engineering Recruitment Weekend 2017
Thursday, February 23, 2017 – Friday, February 24, 2017
4:30 p.m. – 6:30 p.m.
Smart Materials Adaptive Response Technology Laboratory presented by Dr. Oliver J. Myers, Department of Mechanical Engineering, Clemson University, Clemson, SC as part of the Department of Materials Science and Engineering Colloquium Series
Friday, February 10, 2017
11 a.m. – 12 p.m.
Student Seminar Series: “Engineering 3D Printing Materials: From Prototype to Production” by Greg Ellson (Dr. Walter Voit’s Group)
Friday, January 20, 2017
11 a.m. – 12 p.m.
Expanding the Toolbox: Design and Discovery Using Material Modeling Methods, presented by Susan B. Sinnott, Department of Materials Science and Engineering, The Pennsylvania State University, University Park, PA, as part of the Department of Materials Sc
Friday, January 13, 2017
11 a.m. – 12 p.m.
